I’m swap a b16 into a del sol body and as you know the del sol is hydraulic and b16 use cable clutch. Instead of changing the clutch padel and every thing else is there some thing I can use to help use the clutch handle up? Check out Hasport.com, I believe they have a [...]
Archive for February, 2010
B16 OBD0 is there a clutch kit to convert hydraulic to cable?
Posted by admin on February 28th, 2010
Posted in 
My husband drives a 92 chevy cheyenne standard and it needs a clutch what to do?
Posted by admin on February 28th, 2010
He has already changed the clutch but we have no pressure to the slave cylinder why is that any ideas??? If you have no pressure to the slave cylinder, you most likely need to make sure there’s enough fluid and there’s no air in the line (do this by bleeding the clutch master cylinder. If [...]
Is it better for your standard car to ease to a stop while holding the clutch?
Posted by admin on February 28th, 2010
Me father tells me to always slow down to stops with my standard car with the clutch unpressed so that the engine slows the car down so it leaves less pressure on the brakes but i feel that this just stresses the engine. Who is right? If you talk to 3 people on this, you’ll [...]
Suzuki 2005 Rm 250, What’s the best way to fix sticky clutch without buying expensive parts ?
Posted by admin on February 28th, 2010
Also, Best engine mods ( Porting, etc), to get more low end and torque ? The clutch… depends on what is causing it. As the above poster stated. You really didn’t give us enough info to determine "what" the problem is. Low End & Torque… Try a new pipe. You might want to try a [...]
about clutch kits and tranny’s……?
Posted by admin on February 27th, 2010
i plan on getting a clutch master fx100 clutch kit and a fidanza flywheel, just wondering will this hurt the tranny at all installing an aftermarket clutch and flywheel due to better engagement from the clutch? don’t know to much about it and was wondering, and also when would be a time to get a [...]
’93 chevy clutch problem?
Posted by admin on February 27th, 2010
I have a ’93 chevy silverado 4X4 and I’ve been having a lot of problems with the clutch. I have bled the clutch several times and i still haven’t fixed the problem. I was thinking it’s probably time for a new clutch? Any advice would be helpful thank you. I’ve had many Chevy Trucks but [...]
